The daily Schaaf 16: Hypnotica


I tried today getting some algorithmic sequences out of the A-155 sequencer from Doepfer. If you own the A-155 you probably noticed the opportunity to change the  range of the sequenced control voltages. The first idea was to spread the range to a maximum and limit the range with a VCA before feeding the voltage to the oscillator input. There are many ways to control the VCA so I checked my module list and had the following idea:
1.) Feeding Noise into a Sample and Hold circuit.
2.) Clock the Sample and Hold Circuit with a sequence line
3.) Control the VCA level with the output of the Sample and hold output.
If I would use this voltage from the VCA output  to control a VCO direct, the results would be awful. You need a pitch quantizer between the VCA output and the Oscillator control voltage input. In this example I used a Delta CEP A for the random sequence. It’s oscillator has already a pitch quantizer on board. I selected a pentatonic, minor scale for the quantizer and really liked the results. I added two delay lines and could not resist to play  some additional live tracks. Before I started my session I entered two additional sequences into the Spectralis. One bass sequence with probability (some steps are set to a probability of 50%) runs on the hybrid synth engine with the 24dB lowpass filter and one DSP synth track plays a chimes multisample – but I shortened the envelopes and put a Highpass filter and vibrato on the sound and arranged it just on top of the rest.
I am playing some Acceleator, D-50 and DX-7 sounds in a live session. I truncated after some minutes. I created the video because it’s easier to share as a video.

 

Heute probierte ich, ein paar algorithmische Sequenzen mit dem Doepfer A-155 Sequencer zu erzeugen. Eine sich endlos wiederholende 8 Noten Sequenz ist ja nicht immer das Mittel der Wahl. Es gibt sicherlich viele Möglichkeiten ein Zufallselement in die Sequenzen hineinzubringen. Ich entschied mich dafür, direkt die Steuerspannungsfolgen vom Stepsequenzer zu verändern. Dazu setzte ich zunächst einen VCA zwischen den Steuerspannungseingang des Oszillators und dem Steuerspannungsausgang der Sequenzerlinie. Folgendermaßen ist meine tonale Zufallssequenz entstanden:
1) Ein vom Sequenzer getriggertes Sample and Hold Modul nimmt mit jedem Trigger ein Sample von dem Rauschen und erzeugt so eine rhythmische Zufallsspannung.
2.) Diese stufige Zufallsspannung steuert den Hub der Sequenzer-Steuerspannung indem sie den VCA steuert.
3.) Der Ausgang des VCAs würde allein nur sehr unvollkommene und unmusikalische Sequenzen von sich geben. Sie brauchen entweder einen Quantizer oder aber Oszillatoren mit eingebauten Quantizern wie dem RT-311 Swarm Oscillator oder dem Delta Cep A, der ebenfalls über einen Tonhöhen Quantizer verfügt. Ich habe eine pentatonische Moll-Folge ausgewählt. Mit dem Spectralis Hybrid Synth habe ich später eine Bass-Sequenz eingeblendet. Deren Steps erklingen nicht bei jedem Durchlauf gleich. Hier sorgt Probability dafür, dass manche Noten nicht jedes Mal gespielt werden. Zur Abrundung habe ich metallisches Geklimper von einem Glockenspiel Sample hinzugefügt. Die Hüllkurven für das Sample habe ich sehr kurz eingestellt, ein Hochpass-Filter zur Ausdünnung benutzt und das ganze mit etwas Vibrato gewürzt.
Als die Sequenzer liefen konnte ich gar nicht anders, als hin- und wieder dazu zu spielen. Man hört den Accelerator, einen DX-7II und einen D-550.

Schreibe einen Kommentar